Home/ Boats/ Albin Marine (Swe)/ Stratus 36 Albin
Sailboat Specifications

Stratus 36 Albin

Fractional Sloop · Fin W/Spade Rudder

Designed by Peter Norlin · Built by Albin Marine (Swe) · First built 1980

+ Add to Compare
LOA 35.17 ft  ·  Beam 10.83 ft  ·  Displacement 11,466.00 lb  ·  Sail Area 565.00 ft²  ·  Fractional Sloop  ·  Fin W/Spade Rudder
About the Stratus 36 Albin Sailboat

Built by Sweden's Albin Marine from 1980 to 1984, this Peter Norlin-designed cruiser represents solid Scandinavian engineering with a focus on seaworthiness and comfort. With 130 hulls produced during its four-year run, the Stratus 36 developed a reputation as a capable coastal and offshore cruising sailboat that balances performance with livability. Norlin's design features a modern fin keel with spade rudder configuration that provides good handling characteristics, while the fractional sloop rig offers versatility in varying wind conditions. The boat's moderate displacement of 11,466 pounds, coupled with substantial ballast of 4,960 pounds, creates a stable platform that inspires confidence in challenging conditions. A comfort ratio of 25.05 indicates this yacht leans toward the performance end of the cruising spectrum without sacrificing seaworthiness. The hull's proportions, with a waterline length of 27.24 feet supporting the 35.17-foot overall length, provide a good balance of interior volume and sailing efficiency. Her SA/Displacement ratio of 17.84 suggests moderate power that won't overwhelm novice sailors while still delivering respectable performance. The Swedish build quality, combined with fiberglass construction, has helped many examples maintain their value and structural integrity decades after launch.

Dimensions & Specifications
LOA (Length Overall) 35.17 ft / 10.72 m
LWL (Waterline Length) 27.24 ft / 8.30 m
Beam 10.83 ft / 3.30 m
Max Draft 5.90 ft / 1.80 m
Displacement 11,466.00 lb / 5,201 kg
Ballast 4,960.00 lb / 2,250 kg
Ballast Type Lead
Sail Area (Reported) 565.00 ft² / 52.49 m²
Design & Construction
Hull Type Fin w/spade rudder
Rigging Type Fractional Sloop
Construction FG
Designer Peter Norlin
Builder Albin Marine (SWE)
First Built 1980
Last Built 1984
Number Built 130
Associations IOR 3/4 ton
Owner Reviews

No owner reviews yet — be the first to share your experience with this boat.

Engine & Accommodations
Engine Make Volvo Penta
Engine Model MD11
Engine Type Diesel
Horsepower 23
Fuel Capacity 60 gals / 227 L
Water Capacity 120 gals / 454 L
Frequently Asked Questions

What is the Stratus 36 Albin's sail area to displacement ratio?

The Stratus 36 Albin has a Sail Area to Displacement ratio (SA/D) of 17.84. Values between 14–18 are typical cruising sailboats; 18–22 is cruiser/racer; over 22 is performance racing.

What is the Stratus 36 Albin's comfort ratio?

The Stratus 36 Albin has a Ted Brewer Comfort Ratio of 25.05. A ratio over 30 indicates good offshore comfort; over 40 is very comfortable offshore.

Is the Stratus 36 Albin safe for offshore sailing?

The Stratus 36 Albin has a Capsize Screening Formula value of 1.92. Values under 2.0 are considered acceptable for offshore sailing; under 1.8 is ideal.

What is the hull speed of the Stratus 36 Albin?

The theoretical hull speed of the Stratus 36 Albin is 6.99 kn knots, calculated from its waterline length.

How much does a Stratus 36 Albin weigh?

The Stratus 36 Albin has a displacement of 11,466.00 lb and a length overall (LOA) of 35.17 ft.

Who designed the Stratus 36 Albin?

The Stratus 36 Albin was designed by Peter Norlin, first built in 1980.