Home/ Boats/ Tåsinge Glasfiber A/S (Den)/ Impala 36 Jensen
Sailboat Specifications

Impala 36 Jensen

Fractional Sloop · Fin W/Spade Rudder

Designed by E. Bjørn Jensen · Built by Tåsinge Glasfiber A/S (Den) · First built 1985

+ Add to Compare
LOA 36.09 ft  ·  Beam 11.81 ft  ·  Displacement 11,684.00 lb  ·  Sail Area 635.00 ft²  ·  Fractional Sloop  ·  Fin W/Spade Rudder
About the Impala 36 Jensen Sailboat

Danish naval architect E. Bjørn Jensen created this elegant 36-footer as a well-balanced cruiser-racer that first launched in 1985. Built by Tåsinge Glasfiber in Denmark, the Impala 36 Jensen showcases Scandinavian design philosophy with its clean lines and practical layout optimized for both performance and comfort. The boat's moderate displacement and fin keel with spade rudder configuration delivers responsive handling while maintaining stability in varied conditions. With a fractional sloop rig carrying 635 square feet of sail area, the Impala 36 offers spirited performance without being overpowered, making it accessible to crews of varying experience levels. The SA/Displacement ratio of 19.8 indicates good sailing performance in moderate winds, while the hull speed of 7.36 knots provides respectable passage-making ability. Particularly well-suited for coastal cruising and club racing, this fiberglass yacht strikes an appealing balance between comfort and performance. The comfort ratio of 21.09 suggests a motion that's lively enough for sailing enthusiasm while remaining comfortable for extended cruising. The capsize screening formula of 2.09 indicates good offshore capability, though the design shines brightest in coastal waters where its responsive nature and seaworthy construction can be fully appreciated.

Dimensions & Specifications
LOA (Length Overall) 36.09 ft / 11.00 m
LWL (Waterline Length) 30.18 ft / 9.20 m
Beam 11.81 ft / 3.60 m
Max Draft 6.23 ft / 1.90 m
Displacement 11,684.00 lb / 5,300 kg
Ballast 4,850.00 lb / 2,200 kg
Ballast Type Iron
Sail Area (Reported) 635.00 ft² / 58.99 m²
Design & Construction
Hull Type Fin w/spade rudder
Rigging Type Fractional Sloop
Construction FG
Designer E. Bjørn Jensen
Builder Tåsinge Glasfiber A/S (DEN)
First Built 1985
Owner Reviews

No owner reviews yet — be the first to share your experience with this boat.

Engine & Accommodations
Engine Make Volvo Penta
Engine Type Diesel
Horsepower 28
Fuel Capacity 13 gals / 49 L
Water Capacity 26 gals / 98 L
Frequently Asked Questions

What is the Impala 36 Jensen's sail area to displacement ratio?

The Impala 36 Jensen has a Sail Area to Displacement ratio (SA/D) of 19.8. Values between 14–18 are typical cruising sailboats; 18–22 is cruiser/racer; over 22 is performance racing.

What is the Impala 36 Jensen's comfort ratio?

The Impala 36 Jensen has a Ted Brewer Comfort Ratio of 21.09. A ratio over 30 indicates good offshore comfort; over 40 is very comfortable offshore.

Is the Impala 36 Jensen safe for offshore sailing?

The Impala 36 Jensen has a Capsize Screening Formula value of 2.09. Values under 2.0 are considered acceptable for offshore sailing; under 1.8 is ideal.

What is the hull speed of the Impala 36 Jensen?

The theoretical hull speed of the Impala 36 Jensen is 7.36 kn knots, calculated from its waterline length.

How much does a Impala 36 Jensen weigh?

The Impala 36 Jensen has a displacement of 11,684.00 lb and a length overall (LOA) of 36.09 ft.

Who designed the Impala 36 Jensen?

The Impala 36 Jensen was designed by E. Bjørn Jensen, first built in 1985.