Home/ Boats/ Tåsinge Glasfiber A/S (Den)/ Impala 27
Sailboat Specifications

Impala 27

Fractional Sloop · Fin W/Transom Hung Rudder

Designed by E. Bjørn Jensen · Built by Tåsinge Glasfiber A/S (Den) · First built 1983

+ Add to Compare
LOA 27.39 ft  ·  Beam 10.17 ft  ·  Displacement 5,071.00 lb  ·  Sail Area 397.00 ft²  ·  Fractional Sloop  ·  Fin W/Transom Hung Rudder
About the Impala 27 Sailboat

Danish designer E. Bjørn Jensen created a well-balanced coastal cruiser when he penned the Impala 27 in the early 1980s. Built by Tåsinge Glasfiber A/S in Denmark from 1983 to 1993, this fiberglass sloop represents thoughtful Scandinavian design philosophy with its emphasis on seaworthiness and practical sailing characteristics. With a displacement of 5,071 pounds and substantial ballast ratio, the Impala 27 offers reassuring stability for coastal and near-offshore sailing. The fin keel and transom-hung rudder configuration provides responsive handling while maintaining the structural simplicity that many cruising sailors prefer. Her fractional sloop rig delivers a manageable 397 square feet of sail area, making her well-suited for small crews or single-handed sailing. The boat's comfort ratio of 14.69 suggests a relatively swift motion in seaways, while her capsize screening formula of 2.37 indicates reasonable ocean-going capability for experienced sailors. Limited production of just 54 hulls makes the Impala 27 a relatively rare find on the used boat market. This design appeals to sailors seeking a genuine small cruiser with European sensibilities – robust construction, efficient sailing characteristics, and the ability to handle challenging conditions with confidence.

Videos
Dimensions & Specifications
LOA (Length Overall) 27.39 ft / 8.35 m
LWL (Waterline Length) 22.97 ft / 7.00 m
Beam 10.17 ft / 3.10 m
Max Draft 5.41 ft / 1.65 m
Displacement 5,071.00 lb / 2,300 kg
Ballast 2,215.00 lb / 1,005 kg
Ballast Type Iron
Sail Area (Reported) 397.00 ft² / 36.88 m²
Design & Construction
Hull Type Fin w/transom hung rudder
Rigging Type Fractional Sloop
Construction FG
Designer E. Bjørn Jensen
Builder Tåsinge Glasfiber A/S (DEN)
First Built 1983
Last Built 1993
Number Built 54
Associations Impala 27 Racing Association
Related Sailboats J27 · Mirage 275 · Sr 27 · Halman Horizon · Caliber 28
Owner Reviews

No owner reviews yet — be the first to share your experience with this boat.

Engine & Accommodations
Water Capacity 15 gals / 57 L
Frequently Asked Questions

What is the Impala 27's sail area to displacement ratio?

The Impala 27 has a Sail Area to Displacement ratio (SA/D) of 21.58. Values between 14–18 are typical cruising sailboats; 18–22 is cruiser/racer; over 22 is performance racing.

What is the Impala 27's comfort ratio?

The Impala 27 has a Ted Brewer Comfort Ratio of 14.69. A ratio over 30 indicates good offshore comfort; over 40 is very comfortable offshore.

Is the Impala 27 safe for offshore sailing?

The Impala 27 has a Capsize Screening Formula value of 2.37. Values under 2.0 are considered acceptable for offshore sailing; under 1.8 is ideal.

What is the hull speed of the Impala 27?

The theoretical hull speed of the Impala 27 is 6.42 kn knots, calculated from its waterline length.

How much does a Impala 27 weigh?

The Impala 27 has a displacement of 5,071.00 lb and a length overall (LOA) of 27.39 ft.

Who designed the Impala 27?

The Impala 27 was designed by E. Bjørn Jensen, first built in 1983.