Home/ Boats/ Morris Yachts (Usa)/ Annie 30
Sailboat Specifications

Annie 30

Masthead Sloop · Long Keel W/Trans. Hung Rudder

Designed by Chuck Paine · Built by Morris Yachts (Usa) · First built 1980

+ Add to Compare
LOA 29.42 ft  ·  Beam 9.42 ft  ·  Displacement 11,027.00 lb  ·  Sail Area 447  ·  Masthead Sloop  ·  Long Keel W/Trans. Hung Rudder
About the Annie 30 Sailboat

With limited specifications available, the Annie 30 represents a somewhat obscure entry in the 30-foot sailboat market, making detailed research challenging for prospective buyers. This scarcity of information suggests the model likely had a limited production run or was built by a smaller manufacturer that didn't achieve widespread market penetration. Based on its 30-foot length, this sailboat would typically fall into the coastal cruising category, offering enough space for weekend getaways and short-term cruising adventures while remaining manageable for a small crew. Boats of this size generally strike a balance between comfort and performance, providing adequate accommodation for extended sailing without the complexity of larger vessels. The limited documentation surrounding the Annie 30 means potential buyers should exercise particular diligence when evaluating individual boats. Without comprehensive manufacturer specifications or widespread owner feedback, assessing the vessel's construction quality, sailing characteristics, and long-term reliability becomes more dependent on professional surveys and careful inspection. This situation often creates opportunities for informed buyers to find value in lesser-known designs, though it also increases the importance of thorough due diligence before purchase.

Dimensions & Specifications
LOA (Length Overall) 29.42 ft / 8.97 m
LWL (Waterline Length) 24.50 ft / 7.47 m
Beam 9.42 ft / 2.87 m
Max Draft 4.50 ft / 1.37 m
Displacement 11,027.00 lb / 5,002 kg
Ballast 4,400.00 lb / 1,996 kg
Ballast Type lead
Sail Area (Reported) 447
Design & Construction
Hull Type Long keel w/trans. hung rudder
Rigging Type Masthead Sloop
Construction FG
Designer Chuck Paine
Builder Morris Yachts (USA)
First Built 1980
Number Built 16
Owner Reviews

No owner reviews yet — be the first to share your experience with this boat.

Engine & Accommodations
Horsepower 13
Fuel Capacity 18 gals / 68 L
Water Capacity 37 gals / 140 L
Frequently Asked Questions

What is the Annie 30's sail area to displacement ratio?

The Annie 30 has a Sail Area to Displacement ratio (SA/D) of 14.49. Values between 14–18 are typical cruising sailboats; 18–22 is cruiser/racer; over 22 is performance racing.

What is the Annie 30's comfort ratio?

The Annie 30 has a Ted Brewer Comfort Ratio of 33.07. A ratio over 30 indicates good offshore comfort; over 40 is very comfortable offshore.

Is the Annie 30 safe for offshore sailing?

The Annie 30 has a Capsize Screening Formula value of 1.7. Values under 2.0 are considered acceptable for offshore sailing; under 1.8 is ideal.

What is the hull speed of the Annie 30?

The theoretical hull speed of the Annie 30 is 6.63 knots, calculated from its waterline length.

How much does a Annie 30 weigh?

The Annie 30 has a displacement of 11,027.00 lb and a length overall (LOA) of 29.42 ft.

Who designed the Annie 30?

The Annie 30 was designed by Chuck Paine, first built in 1980.